Anthem MRX Remote 1.0

An application has been developed to provide users with a remote control function for Anthem MRX 710, MRX 510, and MRX 310 audio video receivers. This app closely mimics the factory remote control, operating through the local network and enabling users to control their receivers from a different room. Commands are conveniently categorized on separate pages, allowing for easy navigation by swiping the screen sideways.

It is important to note the following:

1. Software version 1.2.1 or later must be installed on the MRX receiver.
2. An Ethernet connection to the rear panel of the MRX receiver is mandatory, and the control device must be on the same local network.
3. When using the app for the first time, ensure that the MRX is powered on beforehand so that the app can configure necessary settings.
4. The app can control only one MRX per network.
5. Each MRX can be controlled by one device at a time; in cases where multiple devices are running the app simultaneously, the MRX will respond to the one with the most recent connection.
6. If a custom IP or RS-232 control system is currently controlling or will control the MRX, it is advisable not to use this app to prevent potential conflicts. It is generally recommended to streamline network controls for optimal performance.